The Sanipit 24 GR is the ideal Retrofit 1HP Grinder Pump! Easily Replace Your Sewage Pump
Features
• Pre-assembled heavy-duty retrofit insert that fits most existing 24” basins. (contact us for full list)
• Powerful 1 HP motor equipped with stainless steel grinder blade meant for residential & commercial applications.
• Capable of discharging up to 66GPM through a 2” discharge + vent
• Capable of pumping up to 25 Ft (Max. Shut-off head: 33 Ft).
• Inlet: 4”
• Dry cavity and Easy access to all major internal components, including motor, grinder blade, and pressure switches.
• Rated IP68 with external control panel and visual/audible alarm system.
• Equipped with a fail-proof air pressure switch system with triple redundancy.
• Certifications: CSA (IPC, NSPC)
• 4 Years limited warranty
Technical features
| Sanipit® 24 GR | |
|---|---|
| Part number | 053 |
| Max. horizontal discharge | 328 ft |
| Max. vertical discharge | 25 ft |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Amperage | 10 Amps (Max) |
| Motor | 1 HP oil-filled thermally protected motor |
| Capacitor rating | 60 microfarad |
| Operating temperature | 158°F |
| Power cord length | 32 inches |
| Noise level (measured at 3 ft.) | ≤ 68 dBA (Lp) |
| Discharge pipe diameter | 2″ |
| Discharge rate at 3 ft | 66 GPM |
| Shut-off head | 33 ft. |
| Normal running time | Depends on number of fixtures |
| Inlets diameters | 4″ (side) |
| Ventilation diameter | 2″ vent (top) |
| Type of activation | Pressure switches, Circuit board |
| Weight | 44 lbs / 20 kg |
| Certifying agencies | CSA (IPC, NSPC) |
